Filters: Tags: seismic (X)
124 results (64ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types
|
Probabilistic seismic hazard maps were prepared for Alaska portraying peak horizontal ground acceleration and horizontal spectral response acceleration for 0.2, 0.3, and 1.0 second periods with probabilities of exceedance of 10% in 50 years and 2% in 50 years. This particular data set is for peak horizontal acceleration with a 10% probability of exceedance in 50 years. All of the maps were prepared by combining hazard derived from spatially-smoothed historic seismicity with hazard from fault-specific sources. The acceleration values contoured are the random horizontal component. The reference site condition is firm rock, defined as having an average shear-wave velocity of 760 m/sec in the top 30 meters corresponding...
Categories: Web Site;
Tags: 02013 = Aleutians East,
02016 = Aleutians West,
1500 - Hazards,
1501 - Earthquakes,
Alaska,
The data set consists of text files used to create the synthetic seismogram - City of Miramar, G-2946, (IW-2), Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - City of Hollywood Utility, G-2961, (HOL-IW1), Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
A one-year seismic hazard forecast for the Central and Eastern United States, based on induced and natural earthquakes, has been produced by the U.S. Geological Survey. The model assumes that earthquake rates calculated from several different time windows will remain relatively stationary and can be used to forecast earthquake hazard and damage intensity for the year 2016. This assessment is the first step in developing an operational earthquake forecast for the CEUS, and the analysis could be revised with updated seismicity and model parameters. Consensus input models consider alternative earthquake catalog durations, smoothing parameters, maximum magnitudes, and ground motion estimates, and represent uncertainties...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Arizona,
California,
Colorado,
Earthquake,
Hazard,
The U. S. Geological Survey (USGS) makes long-term seismic hazard forecasts that are used in building codes. The hazard models usually consider only natural seismicity; non-tectonic (man-made) earthquakes are excluded because they are transitory or too small. In the past decade, however, thousands of earthquakes related to underground fluid injection have occurred in the central and eastern U.S. (CEUS), and some have caused damage. In response, the USGS is now also making short-term forecasts that account for the hazard from these induced earthquakes. A uniform earthquake catalog is assembled by combining and winnowing pre-existing source catalogs. Seismicity statistics are analyzed to develop recurrence models,...
The files consist of two types: tabulated data files and graphical map files. Data files consist of six .csv files, representing six experiment dates (2016_06_14, 2016_16_15, 2016_18_15, 2016_16_21, 2016_16_22, 2016_16_23). Each of these files contains multiple columns of data, with each column representing either a time measurement or the value of a physical quantity measured at that time (e.g., flow depth, pore pressure, normal stress, etc.). Map files consist of six .pdf files, each representing an experiment date listed above. The maps show the thickness of the sediment deposited onto the runout pad after each experiment. Sediment thickness was determined using photogrammetery software from Adam Technology.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Avalanche,
Blue River, Oregon,
Debris-flow,
Geomorphology,
Geophysics,
This layer is part of the Geological Survey of Canada's earthquake monitoring network. There are some blank fields toward the beginning of the listing, from the time the network was being installed and hence parameters were often unknown. Also, all depths in the table are "fixed" to a depth which is an integer multiple of 5km, according to lowest obtainable residuals and known crustal structure. The number and magnitude of located events are also dependent on the time recorded, as the magnitude threshold lowered as more stations were installed. The larger, potentially damaging earthquakes, however, were likely recorded from the inception of the network as these events produce waves which reach the entire western...
Probabilistic seismic hazard maps were prepared for Alaska portrayingpeak horizontal ground acceleration and horizontal spectral responseacceleration for 0.2, 0.3, and 1.0 second periods with probabilitiesof exceedance of 10% in 50 years and 2% in 50 years. This particulardata set is for horizontal spectral response acceleration for 0.2 secondperiod with a 2% probability of exceedance in 50 years. All ofthe maps were prepared by combining hazard derived from spatially-smoothed historic seismicity with hazard from fault-specific sources.The acceleration values contoured are the random horizontal component.The reference site condition is firm rock, defined as having an averageshear-wave velocity of 760 m/sec in the...
The data set consists of text files used to create the synthetic seismogram - Miami-Dade County North District, G-3805, (IW-3N), Miami-Dade County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - City of Sunrise Utility, G-2981, Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - City of Sunrise Utility, SUN-I3, Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - Deerfield Beach BHC, G-2968, Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
The data collection for the concrete-walled channel downstream from the Brandon Road Lock and Dam near Joliet, Illinois occurred in May 2014 Five pounds per square inch (lb/in2) was used as a threshold water pressure value for this study as this value incorporates fish behavior and structural integrity considerations. The Brandon Road study evaluated the performance of two different water gun configurations within the concrete-walled channel downstream from the lock with depths ranging from 12-15 feet. Data from a single 80 cubic inch (in³) water gun produced a roughly cylindrical 5 lb/in2 pressure field 20 feet in radius, oriented vertically, with the radius decreasing to less than 15 feet at the surface. A combination...
Categories: Data;
Types: Citation;
Tags: Asian Carp,
Brandon Road Lock and Dam,
Illinois,
Illinois River,
Invasive Species,
A one-year seismic hazard forecast for the Central and Eastern United States, based on induced and natural earthquakes, has been produced by the U.S. Geological Survey. The model assumes that earthquake rates calculated from several different time windows will remain relatively stationary and can be used to forecast earthquake hazard and damage intensity for the year 2016. This assessment is the first step in developing an operational earthquake forecast for the CEUS, and the analysis could be revised with updated seismicity and model parameters. Consensus input models consider alternative earthquake catalog durations, smoothing parameters, maximum magnitudes, and ground motion estimates, and represent uncertainties...
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Arizona,
California,
Colorado,
Earthquake,
Hazard,
This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. It represents the chance of experiencing damaging earthquakes for fixed ground shaking levels that corresponds with MMI = VI. The values are obtained by averaging the probability of experiencing MMI = VI based on a peak ground acceleration value of 0.1155 g for site class D, and the probability of experiencing MMI = VI based on 1.0-second spectral acceleration value of 0.102 g for site class D. The data are for the Central and Eastern United States and are based on the one-year model.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Alabama,
Arizona,
Arkansas,
Colorado,
Connecticut,
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for horizontal spectral response acceleration for 1.0-second period with a 10 percent probability of exceedance in 50 years.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for horizontal spectral response acceleration for 0.2-second period with a 50 percent probability of exceedance in 50 years.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
A seismic hazard model for South America, based on a smoothed (gridded) seismicity model, a subduction model, a crustal fault model, and a ground motion model, has been produced by the U.S. Geological Survey. These models are combined to account for ground shaking from earthquakes on known faults as well as earthquakes on un-modeled faults. This data set represents the results of calculations of hazard curves for a grid of points with a spacing of 0.1 degrees in latitude and longitude. This particular data set is for peak ground acceleration with a 10 percent probability of exceedance in 50 years.
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Argentina,
Bolivia,
Brazil,
Chile,
Colombia,
This data set represents the hazard curves for a grid of points with a spacing of 0.05 degrees in latitude and longitude. It represents the annual rate of exceedance versus peak ground acceleration.
Start and end point coordinates for Lake Erie seismic profile
Categories: Physical Item;
Tags: Seismic
|
|
