Skip to main content
Advanced Search

Filters: Tags: resistivity (X)

190 results (128ms)   

Filters
Date Range
Extensions
Types
Contacts
Categories
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
Shallow subsurface electrical conductivity was mapped at North Root National Wildlife Refuge (NWR) in northeast Montana using the DUALEM421 electromagnetic sensor (Dualem, Inc., ON, Canada) in the winter of 2017. Data were acquired by towing the DUALEM421 sensor on a sled behind an all-terrain vehicle or snow machine, with the sensor at a nominal height of 0.3 meters (m) above ground surface. Approximately 9 line-kilometers (km) of data were acquired over an area of approximately 1 square-kilometer. Data were manually edited to remove sensor dropouts, lag corrected for apparent offsets between recorded GPS location and data locations for each coil pair, and averaged to a sounding distance of 1m along the survey...
thumbnail
This content represents a compressed folder of the processed datasets for the waterborne resistivity profiling surveys of streams in the Mississippi Alluvial Plain. This file bundle contains 8 .csv tables, each representing raw data for an individual stream.
thumbnail
Hydrothermally altered rocks, particularly if water saturated, can weaken stratovolcanoes, thereby increasing the potential for catastrophic sector collapses that can lead to far-traveled, destructive debris flows, which are the largest volcanic hazards for Mount Adams and Mount Baker. Evaluating the hazards associated with such alteration is difficult because much of the alteration is obscured by ice and its depth extent is unknown. Intense hydrothermal alteration significantly reduces the resistivity and magnetization of volcanic rock and therefore hydrothermally altered rocks are identified with helicopter electromagnetic and magnetic measurements at Mount Baker and Mount Adams. High resolution magnetic and electromagnetic...
thumbnail
This release contains Active Layer Thickness (ALT) and Organic Layer Thickness (OLT) measurements measured along transects in Alaska, 2015. Site condition information in terms of wildfire burns is also included.
thumbnail
Floating transient electromagnetic (FloaTEM) data were acquired on the Upper Delaware River during December 2018. During the survey, approximately 10 line-kilometers were collected in the Upper Delaware River, near USGS boring 12008-14 (https://webapps.usgs.gov/GeoLogLocator/#!/search) near Barryville, New York study area. Data were collected by members of the U.S. Geological Survey, Hydrogeophysics Branch, New England Water Science Center, and the National Park Service UPDE. FloaTEM data acquired along the Delaware River in Sullivan County, in New York, were collected to test a new continuous water-borne transient electromagnetic data collection platform, and to characterize the subsurface resistivity structure....
thumbnail
Shallow subsurface electrical conductivity was mapped at Beaver Lake National Wildlife Refuge (NWR) in northwest North Dakota using the DUALEM421 electromagnetic sensor (Dualem, Inc., ON, Canada) in the winter of 2018. Data were acquired by towing the DUALEM421 sensor on a sled behind an all-terrain vehicle or snow machine, with the sensor at a nominal height of 0.3 meters (m) above ground surface. Approximately 127 line-kilometers (km) of data were acquired over an area of approximately 8 square-kilometers. At this survey location, the 4m transmitter-receiver horizontal co-planar and perpendicular coil orientations did not function due to equipment malfunction. Data were manually edited to remove sensor dropouts,...
thumbnail
In October and November 2016-2017, transient electromagnetic (TEM) data, also called time domain electromagnetic (TDEM) surveys, were acquired at 120 locations in the Genesee Valley, Livingston County, New York, in order to characterize the subsurface resistivity structure in support of a U.S. Geological Survey groundwater investigation. The TEM data were collected as part of a project to evaluate geophysical methods to characterize the valley-fill sediments, underlying bedrock, and salinity of the subsurface. TEM data were collected using an ABEM WalkTEM unit (acquisition software V 1.1.0 and newer) using two transmitter loop (Tx) sizes, 100 by 100 meter square and 40 by 40 meters square, a center-loop receiver...
thumbnail
Airborne electromagnetic (AEM), magnetic, and radiometric data were acquired November 2018 to February 2019 along 16,816 line-kilometers (line-km) over the Mississippi Alluvial Plain (MAP). Data were acquired by CGG Canada Services, Ltd. with three different helicopter-borne sensors: the CGG Canada Services, Ltd. Resolve frequency-domain AEM instrument that is used to map subsurface geologic structure at depths up to 100 meters, depending on the subsurface resistivity; a Scintrex CS-3 cesium vapor magnetometer that detects changes in deep (hundreds of meters to kilometers) geologic structure based on variations in the magnetic properties of different formations; and a Radiation Solutions RS-500 spectrometer that...
thumbnail
Shallow soil characteristics were mapped near Shellmound, Mississippi, using the DualEM 421 electromagnetic sensor in October 2018. Data were acquired by towing the DualEM sensor on a wheeled cart behind an ATV, with the sensor at a height of 0.432 meters (m) above the ground surface. Approximately 175 line-kilometers of data were acquired over an area of nearly four square kilometers, with 25 m separation between survey lines. Data were manually edited for noise sources such as powerlines or other buried structures, and averaged to regular output soundings every 5 m along survey lines. This data release contains the processed data that have been averaged and culled to produce final resistivity models. Digital data...
thumbnail
Surface-based 2D electrical resistivity tomography (ERT) surveys were used to investigate the distribution of permafrost at wetland sites on the alluvial plain north of the Tanana River, 20 km southwest of Fairbanks, Alaska, in June and September 2014. The sites contained habitat types characteristic of interior Alaska, including thermokarst bog, forested permafrost plateau, and a rich fen. These habitats range from treed to open and vary in groundcover vegetation and peat thickness. Individual surveys used a cable with 56 electrodes at 2-m spacing. At a fen site, ERT surveys were performed across a mixed spruce forest area across a vegetation gradient into an open fen area. At a bog site,surveys were performed...
thumbnail
Airborne electromagnetic (AEM), magnetic, and radiometric data were acquired in late February to early March 2018 along 2,364 line-kilometers in the Shellmound, Mississippi study area. Data were acquired by CGG Canada Services, Ltd. with three different helicopter-borne sensors: the CGG Canada Services, Ltd. RESOLVE frequency-domain AEM instrument that is used to map subsurface geologic structure at depths up to 100 meters, depending on the subsurface resistivity; a Scintrex CS-3 cesium vapor magnetometer that detects changes in deep (hundreds of meters to kilometers) geologic structure based on variations in the magnetic properties of different formations; and a Radiation Solutions RS-500 spectrometer that detects...
thumbnail
Shallow subsurface electrical conductivity was mapped at Stateline National Wildlife Refuge (NWR) in northeast Montana using the DUALEM421 electromagnetic sensor (Dualem, Inc., ON, Canada) in the winter of 2017. Data were acquired by towing the DUALEM421 sensor on a sled behind an all-terrain vehicle or snow machine, with the sensor at a nominal height of 0.3 meters (m) above ground surface. Approximately 3 line-kilometers (km) of data were acquired over an area of approximately .2 square-kilometers. Data were manually edited to remove sensor dropouts, lag corrected for apparent offsets between recorded GPS location and data locations for each coil pair, and averaged to a sounding distance of 1m along the survey...
thumbnail
This folder contains the raw and processed TEM data and inverted soundings showing resistivity (in ohm-m) with depth for all survey sites that were part of transect 1. In October and November 2016-2017, transient electromagnetic (TEM) data, also called time domain electromagnetic (TDEM) surveys, were acquired at 120 locations in the Genesee Valley, Livingston County, in New York, in order to characterize the subsurface resistivity structure in support of a U.S. Geological Survey groundwater investigation. The TEM data were collected as part of a project to evaluate geophysical methods to characterize the valley-fill sediments, underlying bedrock, and salinity of the subsurface. TEM data were collected using an ABEM...
thumbnail
The U.S. Geological Survey (USGS) has been engaged in airborne electromagnetics (AEM) since the 1970s, playing a role in the development of early acquisition systems, developing calibration methods, refining standards for data acquisition, improving data processing, modeling, and interpretation methods, and expanding the range of AEM applications. However, USGS AEM survey visibility and data accessibility has not advanced as rapidly as our use of the technique. This data release catalogs AEM surveys in the United States that have contributed to studies under USGS programs including Water, Geologic Mapping, Minerals, Energy, Environmental Health, Ecosystems, Hazards, and Climate. This dataset contains locations for...
Categories: Data; Types: ArcGIS REST Map Service, ArcGIS Service Definition, Downloadable, Map Service; Tags: Alabama, Arizona, Arkansas, California, Colorado, All tags...
thumbnail
Shallow subsurface electrical conductivity was mapped at Gjesdal East National Wildlife Refuge (NWR) in northeast Montana using the DUALEM421 electromagnetic sensor (Dualem, Inc., ON, Canada) in the winter of 2017. Data were acquired by towing the DUALEM421 sensor on a sled behind an all-terrain vehicle or snow machine, with the sensor at a nominal height of 0.3 meters (m) above ground surface. Approximately 13 line-kilometers (km) of data were acquired over an area of approximately .7 square-kilometers. Data were manually edited to remove sensor dropouts, lag corrected for apparent offsets between recorded GPS location and data locations for each coil pair, and averaged to a sounding distance of 1m along the survey...
thumbnail
Shallow subsurface electrical conductivity was mapped at Hansen National Wildlife Refuge (NWR) in northeast Montana using the DUALEM421 electromagnetic sensor (Dualem, Inc., ON, Canada) in the winter of 2017. Data were acquired by towing the DUALEM421 sensor on a sled behind an all-terrain vehicle or snow machine, with the sensor at a nominal height of 0.3 meters (m) above ground surface. Approximately 10 line-kilometers (km) of data were acquired over an area of approximately .2 square-kilometers. Data were manually edited to remove sensor dropouts, lag corrected for apparent offsets between recorded GPS location and data locations for each coil pair, and averaged to a sounding distance of 1m along the survey path;...
thumbnail
In June 2018, U.S. Geological Survey (USGS) in cooperation with the U.S. Environmental Protection Agency (EPA) collected geophysical measurements to help evaluate the suitability of a proposed landfill site for disposing mine-waste materials in Fredericktown, MO. Frequency domain electromagnetic (FDEM) induction data were collected along the edge of the water. The antenna was placed on a plastic frame and held approximately 1 m above the water surface. The antenna was mounted on a raft that was towed behind a canoe. All unprocessed and processed data including the in-phase and quadrature components in parts per million, electrical conductivity (EC) in milliSiemens per meter (mS/m), and magnetic susceptibility in...
thumbnail
In 2013 the U.S. Geological Survey (USGS) drilled and logged a continuous core located on the northeast flank of the Alcova anticline in the southeastern part of the Wind River Basin, Wyoming to evaluate the source rock potential of the Lower and lowermost Upper Cretaceous marine shales (fig. 1). The well, named the Alcova Reservoir AR–1–13, was spud in the lower part of the Frontier Formation and ended in the upper part of the Cloverly Formation, and recovered core between 40.5 feet (ft) and 623 ft (figs. 1, 2). After coring was completed the USGS recorded geophysical data from the well bore, with digital data collected to a depth of 622 ft. Data include natural gamma, resistivity, conductivity, density, sonic,...


map background search result map search result map Permafrost Soil Measurements; Alaska, 2015 Mount Adams Electromagnetic and Magnetic Data Tabular data of raw data values Airborne Electromagnetic (AEM) Survey Inventory Permafrost Mapping in Two Wetland Systems North of the Tanana River in Interior Alaska 2014 Airborne EM, magnetic, and radiometric survey data Water-borne frequency domain electromagnetic (FDEM) surveys collected in Fredericktown, Missouri, June 2018 LAS digital data files for the U.S.Geological Survey Alcova AR-1-13 core hole, Natrona County, Wyoming AEM inverted resistivity models Processed ground-based EM survey data Time-domain electromagnetic soundings to delineate saline groundwater in the Genesee valley-fill aquifer system, New York (2016-2017) Gjesdal East NWR, Montana, 2017 Hansen NWR, Montana, 2017 North Root NWR, Montana, 2017 Stateline NWR, Montana, 2017 Beaver Lake NWR, North Dakota, 2018 Floating transient electromagnetic (FloaTEM) surveys in the Delaware River near Barryville, New York Transect 1 time-domain electromagnetic soundings to delineate saline groundwater in the Genesee valley-fill aquifer system, New York (2016-2017) Hansen NWR, Montana, 2017 Stateline NWR, Montana, 2017 Water-borne frequency domain electromagnetic (FDEM) surveys collected in Fredericktown, Missouri, June 2018 Gjesdal East NWR, Montana, 2017 North Root NWR, Montana, 2017 Permafrost Mapping in Two Wetland Systems North of the Tanana River in Interior Alaska 2014 Beaver Lake NWR, North Dakota, 2018 Processed ground-based EM survey data Time-domain electromagnetic soundings to delineate saline groundwater in the Genesee valley-fill aquifer system, New York (2016-2017) Transect 1 time-domain electromagnetic soundings to delineate saline groundwater in the Genesee valley-fill aquifer system, New York (2016-2017) Airborne EM, magnetic, and radiometric survey data LAS digital data files for the U.S.Geological Survey Alcova AR-1-13 core hole, Natrona County, Wyoming Tabular data of raw data values Permafrost Soil Measurements; Alaska, 2015 AEM inverted resistivity models Airborne Electromagnetic (AEM) Survey Inventory