Filters: Tags: Washington State (X) > Types: Map Service (X)
8 results (8ms)|
Filters
Date Range
Extensions Types Contacts
Categories Tag Types Tag Schemes |
A total of 27 temperature sensors were deployed along the lower 90 miles of the Yakima River at 7 locations where cold water had been previously observed. These 7 cold-water areas had 3 to 6 temperature sensors installed to document the extent and duration of these cold-water areas and their impacts on mainstem temperatures of the Lower Yakima River. Cold-water areas included the mouths of tributaries, alongside channels, and within alcoves. Sensor deployments ranged from 1 to 2 years beginning in October 2018. All temperature data are included in the Yakima.temperatures.zip folder. Details of each monitoring location are provided in the site.locs.csv file. In addition to the raw data and site location information,...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Aquatic Biology,
Benton County,
Ecology,
Hydrology,
Richland, WA,
This release is an update to the online "Quaternary fault and fold database" for Washington State. The online database was last updated for Washington in 2014 – this 2020 update includes newly identified and modified traces and geometries for on-shore faults gleaned from new peer-reviewed studies and mapping of active faults within the state of Washington. These data contain lines representing the location of faults with known or suspected Quaternary (<1,600,000 yrs) activity in the state of Washington. This data was compiled in conjunction with the Washington State Geological Survey. Faults are attributed following the Quaternary fault and fold database attributes, including information such as age, slip sense,...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Faulting,
Geomorphology,
Quaternary,
Seismic,
Seismology,
Records in this collection are classified into one of four categories that best characterizes the data contained within the borehole record. The classifications are: Geotechnical: Boreholes and pits created with the intent to gain a detailed understanding of the subsurface lithology and soil or rock properties therein. These records have additional data beyond lithologic descriptions including penetrometer resistance, shear and strength tests, density measurements, etc. Lithologic borings: Boreholes are drill solely for the purpose of identifying subsurface lithology. Material testing techniques were not used (or the results are not provided) to allow for a more detailed understanding of subsurface material properties....
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Geological Collection,
Washington State,
geotechnical,
subsurface
This dataset includes spatial locations where surface water presence observations were collected during the late summer baseflow period in Mt. Rainier National Park and surrounding area in Washington State, July 2018 - September 2020. Stream flow status (continuous flow, discontinuous flow, and dry) were recorded using the FLOwPER (FLOw PERmanence) field survey available in the Survey 123 and S1 mobile application for observations collected in 2019 and 2020. Observations collected in 2018 used an earlier version of the FLOwPER survey. Additional information to describe the field conditions are included as part of the survey. The observations were processed to correspond to pixels on the medium resolution National...
This data release summarizes discrete suspended-sediment concentration (SSC) measurements and continuous estimates of SSC for the Yakima River at Kiona (USGS 12510500) for the period between June 01, 2018 and September 30, 2022. Continuous estimates of SSC were derived primarily through calibrated turbidity records. These data were collected to support a better understanding of how water quality influenced stream metabolism and water stargrass growth in the lower Yakima River.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Environmental Health,
Geomorphology,
Hydrology,
USGS Science Data Catalog (SDC),
Washington State,
This data release summarizes suspended sediment monitoring results on the Chehalis (USGS 12031000), Satsop (USGS 12035000) and Wynoochee (USGS 12037400) Rivers between water years 2019 and 2022. Sediment monitoring was based on a combination of continuous turbidity records and discrete suspended-sediment concentration (SSC) measurements. Data and results for each monitoring station were combined into zip files. Each zip file contains 1) summarized SSC measurements used in model calibration, 2) a detailed model archive summary documenting the process used to estimate SSC at 15-minute intervals, and 3) full 15-minute estimates of SSC and suspended loads between Oct. 1, 2018 and Sept 30, 2022. Metadata files within...
These data were compiled from the scans of original thin sections held by the Washington Geology Survey. It is not a complete inventory at present, the Washington Geological Survey intends to add more to this dataset as time and resources permit.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Geological Collection,
Washington State
Boat-mounted acoustic doppler current profilers (ADCPs) were used to collect velocity data on the Columbia River in a small area near Northport, WA. Velocity surveys were collected during two surveys at high-flow, high-stage conditions in May 2018. Bathymetric data were also collected during one of the surveys using a single-beam echo-sounder. The datasets here provide 1) raw ADCP and single-beam survey data, 2) processed summaries of the data, primarily in geospatial data formats, and 3) summary visualizations of transect-averaged velocity and depth characteristics of the surveyed reach.
|
|
