Skip to main content
Advanced Search

Filters: Tags: WATER TABLE (X) > Types: Map Service (X)

20 results (11ms)   

Filters
Date Range
Extensions
Types
Contacts
Categories
Tag Types
Tag Schemes
View Results as: JSON ATOM CSV
thumbnail
The U.S. Geological Survey (USGS) is providing online maps of water-table and potentiometric-surface altitude in the upper glacial, Magothy, Jameco, Lloyd, and North Shore aquifers on Long Island, New York, April–May 2016. Also provided is a depth-to-water map for Long Island, New York, April–May 2016. The USGS makes these maps and geospatial data available as REST Open Map Services (as well as HTTP, JSON, KML, and shapefile), so end-users can consume them on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3398 (Como and others, 2018; https://doi.org/10.3133/sim3398) further describes data collection and map preparation and presents 68x22 in. Portable Document...
thumbnail
This map service is an information surface representing the shallowest distance to the top of a wet soil layer (the water table) within a soil map unit polygon. The value is the annual minimum as well as the component minimum, so the reported value is the nearest the water table gets to the surface of any significant component in the map unit at any time during the year. Although there is data for the whole United States for water table depths, not every map unit polygon has a value. Some parts of the United States have more complete coverage of water table depth than others, but values for water table depth depth are still rather piecemeal in character. Quite often, in many places, more than half of the soil...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
Data for static groundwater-levels measured in about 645 wells during the period of January-April 2016 by the United States Geological Survey (USGS), the Mojave Water Agency, and other local water districts were compiled to construct a regional water-table map. The downloadable shapefile shows the elevation of the water table in the Mojave River and Morongo groundwater basins. This dataset is a digital representation of the contours presented on Plate 1 of Regional Water Table (2016) in the Mojave River and Morongo Groundwater Basins, Southwestern Mojave Desert, California: U.S. Geological Survey Scientific Investigation Map, doi:10.5066/sim3391, published by Meghan C. Dick and Adam R. Kjos. It is a continuation...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
The U.S. Geological Survey (USGS) is providing an online map of stream and lake gage water level measurements on Long Island, New York, April-May 2013. USGS serves this map and geospatial data as a REST Open Map Service (as well as HTTP, JSON, KML, and shapefile), so end-users can use the map and data on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3326 (Como and others, 2015; http://dx.doi.org/10.3133/sim3326) further describes data collection and map preparation and presents 68x22 in. PDF versions, 4 sheets, scale 1:125,000. Continuous records of water level altitude at 16 U.S. Geological Survey (USGS) streamgaging stations (15 streams and...
thumbnail
​ The U.S. Geological Survey (USGS) is providing an online map of depth to water measurements in the upper glacial and Magothy aquifers on Long Island, New York, April-May 2013. USGS serves this map and geospatial data as a REST Open Map Service (as well as HTTP, JSON, KML, and shapefile), so end-users can use the map and data on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3326 (Como and others, 2015; http://dx.doi.org/10.3133/sim3326) further describes data collection and map preparation and presents 68x22 in. PDF versions, 4 sheets, scale 1:125,000. The depth to water table was measured at 335 groundwater monitoring wells (observation and...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
The U.S. Geological Survey (USGS) is providing online maps of water-table and potentiometric-surface altitude in the upper glacial, Magothy, Jameco, Lloyd, and North Shore aquifers on Long Island, New York, April–May 2016. Also provided is a depth-to-water map for Long Island, New York, April–May 2016. The USGS makes these maps and geospatial data available as REST Open Map Services (as well as HTTP, JSON, KML, and shapefile), so end-users can consume them on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3398 (Como and others, 2018; https://doi.org/10.3133/sim3398) further describes data collection and map preparation and presents 68x22 in. Portable Document...
thumbnail
The U.S. Geological Survey (USGS) is providing an online map of a continuous depth to water surface for the upper glacial and Magothy aquifers on Long Island, New York, April-May 2013. USGS serves this map and geospatial data as a REST Open Map Service (as well as HTTP, JSON, KML, and shapefile), so end-users can use the map and data on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3326 (Como and others, 2015; http://dx.doi.org/10.3133/sim3326) further describes data collection and map preparation and presents 68x22 in. PDF versions, 4 sheets, scale 1:125,000. The depth to water table was measured at 335 groundwater monitoring wells (observation...
Thirteen geospatial datasets were developed to characterize the shallow groundwater system in the Lower Gunnison River Basin, Colorado. These geospatial datasets provide information about regolith thickness and altitude of the bedrock surface underlying regolith and display, in vector and raster formats, the generalized extent and thickness of regolith sediments that comprise the shallow groundwater system in the Lower Gunnison River Basin; display, in raster and vector format, the generalized altitude and configuration of the bedrock surface that comprises the base of the shallow groundwater system in the Lower Gunnison River Basin; provide information about depth to water, altitude of the potentiometric surface,...
thumbnail
The depths to a high and average water table below the land surface were estimated across the Clover Creek watershed in Pierce County, Washington. Groundwater model simulations provided initial estimates of water-table depths for the analysis. To provide optimized, data-driven estimates of these depths, a continuous bias correction surface was applied to model output according to differences between simulated and observed water levels at observation wells.
thumbnail
This dataset consists of contours showing the generalized altitude of the potentiometric surface for the shallow groundwater system in the Lower Gunnison River Basin in Delta, Montrose, Ouray, and Gunnison Counties, Colorado. Potentiometric-surface altitude was contoured from values in the raster dataset potalt. The U.S. Geological Survey prepared this dataset in cooperation with the Colorado Water Conservation Board.
thumbnail
The U.S. Geological Survey (USGS) is providing online maps of water-table and potentiometric-surface altitude in the upper glacial, Magothy, Jameco, Lloyd, and North Shore aquifers on Long Island, New York, April–May 2016. Also provided is a depth-to-water map for Long Island, New York, April–May 2016. The USGS makes these maps and geospatial data available as REST Open Map Services (as well as HTTP, JSON, KML, and shapefile), so end-users can consume them on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3398 (Como and others, 2018; https://doi.org/10.3133/sim3398) further describes data collection and map preparation and presents 68x22 in. Portable Document...
thumbnail
A potentiometric surface map for spring 2016 was created for the Mississippi River Valley alluvial (MRVA) aquifer, which was referenced to the North American Vertical Datum of 1988 (NAVD 88), using most of the available groundwater-altitude data from wells and surface-water-altitude data from streamgages. Most of the wells were measured annually or one time, after installation, but some wells were measured more than one time in a year and a small number of wells were measured continually. Streamgages were typically operated continuously. The potentiometric surface map for 2016 was created as part of the U.S. Geological Survey (USGS) Water Availability and Use Science Program to support investigations that characterize...
thumbnail
The U.S. Geological Survey (USGS) is providing online maps of water-table and potentiometric-surface altitude in the upper glacial, Magothy, Jameco, Lloyd, and North Shore aquifers on Long Island, New York, April–May 2016. Also provided is a depth-to-water map for Long Island, New York, April–May 2016. The USGS makes these maps and geospatial data available as REST Open Map Services (as well as HTTP, JSON, KML, and shapefile), so end-users can consume them on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3398 (Como and others, 2018; https://doi.org/10.3133/sim3398) further describes data collection and map preparation and presents 68x22 in. Portable Document...
thumbnail
The U.S. Geological Survey (USGS) is providing online maps of water-table and potentiometric-surface altitude in the upper glacial, Magothy, Jameco, Lloyd, and North Shore aquifers on Long Island, New York, April–May 2016. Also provided is a depth-to-water map for Long Island, New York, April–May 2016. The USGS makes these maps and geospatial data available as REST Open Map Services (as well as HTTP, JSON, KML, and shapefile), so end-users can consume them on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3398 (Como and others, 2018; https://doi.org/10.3133/sim3398) further describes data collection and map preparation and presents 68x22 in. Portable Document...
thumbnail
This point dataset contains water-level information concerning depth to water, potentiometric-surface altitude, and saturated thickness for the shallow groundwater system at selected well and borehole locations in the Lower Gunnison River Basin in Delta, Montrose, Ouray, and Gunnison Counties, Colorado. Depth-to-water data were compiled from measurements reported by the Colorado Division of Water Resources, U.S. Geological Survey, and Bureau of Reclamation. Potentiometric-surface altitude values were computed from the potentiometric-surface altitude raster dataset (potalt). Saturated-thickness values were computed from the saturated-thickness raster dataset (satthk). The U.S. Geological Survey prepared this dataset...
thumbnail
​ The U.S. Geological Survey (USGS) is providing an online map of water-table altitude measurements in the upper glacial and Magothy aquifers on Long Island, New York, April-May 2013. USGS serves this map and geospatial data as a REST Open Map Service (as well as HTTP, JSON, KML, and shapefile), so end-users can use the map and data on mobile and web clients. A companion report, U.S. Geological Survey Scientific Investigations Map 3326 (Como and others, 2015; http://dx.doi.org/10.3133/sim3326) further describes data collection and map preparation and presents 68x22 in. PDF versions, 4 sheets, scale 1:125,000. Water level altitudes were measured at 334 observation wells and 1 supply well screened...


    map background search result map search result map Annual Minimum Soil Depth To Water Table Depth to Water Data in the Upper Glacial and Magothy Aquifers, April-May 2013 Stream and Lake Average Water-Level Altitudes, April-May 2013 Water Level Data in the Upper Glacial and Magothy Aquifers, April-May 2013 Depth to Water Raster on Long Island, New York, 2013 Regional Water Table (2016) in the Mojave River and Morongo Groundwater Basins, Southwestern Mojave Desert, California Potentiometric-surface altitude contours for the shallow groundwater system in the Lower Gunnison River Basin, Colorado Selected water-level data for the shallow aquifer system in the Lower Gunnison River Basin, Colorado Depth to Water Data in the Upper Glacial and Magothy Aquifers, April-May 2016 Depth to the Water Raster on Long Island, New York, April–May 2016 Stream and Lake Average Water-Level Altitudes, April-May 2016 Water Table Data in the Upper Glacial and Magothy Aquifers, April-May 2016 Approximate Regional Groundwater Divide on Long Island, New York, April-May 2016 Data associated with potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (a) Groundwater altitude data, from monitoring-networks wells, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (b) Groundwater altitude data, from driller-measured wells, considered for the potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (c) Surface-water altitude data, from streamgages, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (d) Spatial data set of the potentiometric surface contours, Mississippi River Valley alluvial aquifer, spring 2016, in feet High and average water table estimates for Clover Creek watershed, Pierce County, Washington High and average water table estimates for Clover Creek watershed, Pierce County, Washington Stream and Lake Average Water-Level Altitudes, April-May 2013 Stream and Lake Average Water-Level Altitudes, April-May 2016 Potentiometric-surface altitude contours for the shallow groundwater system in the Lower Gunnison River Basin, Colorado Selected water-level data for the shallow aquifer system in the Lower Gunnison River Basin, Colorado Approximate Regional Groundwater Divide on Long Island, New York, April-May 2016 Depth to Water Data in the Upper Glacial and Magothy Aquifers, April-May 2016 Water Table Data in the Upper Glacial and Magothy Aquifers, April-May 2016 Depth to Water Data in the Upper Glacial and Magothy Aquifers, April-May 2013 Water Level Data in the Upper Glacial and Magothy Aquifers, April-May 2013 Depth to Water Raster on Long Island, New York, 2013 Depth to the Water Raster on Long Island, New York, April–May 2016 Regional Water Table (2016) in the Mojave River and Morongo Groundwater Basins, Southwestern Mojave Desert, California (b) Groundwater altitude data, from driller-measured wells, considered for the potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 Data associated with potentiometric surface, Mississippi River Valley alluvial aquifer, spring 2016 (a) Groundwater altitude data, from monitoring-networks wells, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (c) Surface-water altitude data, from streamgages, considered for the potentiometric surface map, Mississippi River Valley alluvial aquifer, spring 2016 (d) Spatial data set of the potentiometric surface contours, Mississippi River Valley alluvial aquifer, spring 2016, in feet Annual Minimum Soil Depth To Water Table