Skip to main content
Advanced Search

Filters: Tags: VNIR (X)

22 results (80ms)   

View Results as: JSON ATOM CSV
thumbnail
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
thumbnail
Approximately 1,900 line square kilometers of imagery were collected using a HyMap™ sensor (Cocks and others, 1998) mounted on a modified Piper Navajo aircraft. The aircraft was flown at an altitude of approximately 5,050 m (3,480 m above the mean ground surface elevation of 1570 m) resulting in average ground spatial resolution of 6.7 m. Solar elevation and azimuth angles ranged from 42.0-48.3° (average 46.2°) and 134.2-182.4° (average 155°), respectively. HyMap measured reflected sunlight in 126 narrow channels that cover the wavelength region of 455 to 2,483 nm. Data were delivered by the operators of the sensor (HyVista Corp., Australia) in units of radiance (data are available in Kokaly and others, 2017)....
thumbnail
Reflectance data from HyMap™ were processed using the Material Identification and Characterization Algorithm (MICA), a module of the USGS PRISM (Processing Routines in IDL for Spectroscopic Measurements) software (Kokaly, 2011), programmed in Interactive Data Language (IDL; Harris Geospatial Solutions, Broomfield, Colorado). The HyMap reflectance data are provided and described in this data release. MICA identifies the spectrally predominant mineral(s) in each pixel of imaging spectrometer data by comparing continuum-removed spectral features in the pixel’s reflectance spectrum to continuum-removed absorption features in reference spectra of minerals, vegetation, water, and other materials. Linear continuum removal...
thumbnail
Mineral predominance data were a derivative product from the Corescan© reflectance data. Corescan Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a...
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
A map of the wavelength position of the white mica 2,200 nanometer (nm) Al-OH absorption feature was compiled for a region of Nabesna, Alaska, using HyMap™ reflectance data provided and described in this data release. White mica wavelength position was computed for each pixel with spectrally predominant muscovite or illite. The computation was made using a function of the USGS PRISM (Processing Routines in IDL for Spectroscopic Measurements) software (Kokaly, 2011), programmed in Interactive Data Language (IDL; Harris Geospatial Solutions, Broomfield, Colorado). The PRISM function applies linear continuum-removal (Clark and Roush, 1984) to the 2,200 nm feature and fits a parabola to three channels: the channel...
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
Categories: Data; Types: Downloadable, Map Service, OGC WFS Layer, OGC WMS Layer, OGC WMS Service, Shapefile; Tags: Alaska, Alaska, Alaska Range, Bond Creek, Canada, All tags...
thumbnail
Approximately 1,900 square kilometers of imagery were collected from July 14 to July 21, 2014 using a HyMap™ sensor (Cocks and others, 1998) mounted on a modified Piper Navajo aircraft. The survey area covered parts of the Wrangell and Nutzotin Mountains in the eastern Alaska Range near Nabesna, Alaska. The aircraft was flown at an altitude of approximately 5,050 meters (m) (3,480 m above the mean ground surface elevation of 1570 m) resulting in average ground spatial resolution of 6.7 m. HyMap measured reflected sunlight in 126 narrow channels that cover the wavelength region of 455 to 2,483 nanometers (nm). Data were delivered by the operators of the sensor (HyVista Corp., Australia) in units of radiance (Kokaly...
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
Measurements of reference materials were made on the Corescan© HCI-III to evaluate the supplied channel wavelength positions and bandpass values. Wavelength position and bandpass of channels in a spectrometer, referred to as full-width half max (FWHM) in the contractor's documentation (Corescan_Product_MetaData_v3.pdf), are two fundamental spectral characteristics that need to be known in order to spectrally identify minerals by comparison to a spectral library, like the Material Identification and Characterization Algorithm (MICA) analysis used to generate the mineral predominance maps. Spectrometers with finer bandpass can reveal greater spectral detail that can be related to a material’s chemical composition...
thumbnail
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017a). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
Imaging spectrometer (hyperspectral) data were collected using the HyMap™ sensor over the Nabesna Area of Interest (AOI) in the eastern Alaska Range, July 14 and July 21, 2014. The primary study area was a remote part of the eastern Alaska Range where porphyry deposits are exposed. The HyMap imaging spectrometer measured reflected sunlight in 126 narrow channels spanning the 0.4 to 2.5 micron wavelength region of the electromagnetic spectrum. The data were collected at a nominal 6-m ground-instantaneous field of view (GIFOV). A total 1,900 square kilometers were collected. This data release provides flight line data for the survey and a report describing the dataset and procedures.
thumbnail
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. This area contains exposed porphyry deposits and hand samples were collected throughout the region in support of the HyMap imaging spectrometer survey (https://doi.org/10.5066/F7DN435W) (Kokaly and others, 2017). The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering...
thumbnail
Corescan© Hyperspectral Core Imager Mark III (HCI-III) system data were acquired for hand samples, and subsequent billets made from the hand samples, collected during the U.S. Geological Survey (USGS) 2014, 2015, and 2016 field seasons in the Nabesna area of the eastern Alaska Range. The HCI-III system consists of three different components. The first is an imaging spectrometer which collects reflectance data with a spatial resolution of approximately 500 nanometers (nm) for 514 spectral channels covering the 450-2,500 nm wavelength range of the electromagnetic spectrum (Martini and others, 2017). The second is a spectrally calibrated RGB camera that collects high resolution imagery of the samples with a 50 micrometer...


map background search result map search result map Airborne imaging spectrometer data collected for characterizing mineral resources near Nabesna, Alaska, 2014 Calibration01 Calibration03 Run04 Run05 Run06 Run08 Run09 Run10 Imaging spectrometer reflectance data, mineral predominance map, and white mica wavelength position map, Nabesna Quadrangle, Alaska Imaging spectrometer reflectance data for Nabesna, Alaska Mineral predominance map for Nabesna, Alaska, derived from imaging spectrometer reflectance data Corescan© Hyperspectral Core Imager, Mark III system data collected for the characterization of mineral resources near Nabesna, Alaska, 2014-2016 White mica wavelength position map for Nabesna, Alaska, derived from imaging spectrometer reflectance data Hyperspectral HyperspectralCalibrated LaserProfiler RGBImage MineralPredominance Calibration Run05 Hyperspectral HyperspectralCalibrated LaserProfiler RGBImage MineralPredominance Calibration Corescan© Hyperspectral Core Imager, Mark III system data collected for the characterization of mineral resources near Nabesna, Alaska, 2014-2016 Calibration03 Calibration01 Run09 Run06 Run08 Run04 Run10 Airborne imaging spectrometer data collected for characterizing mineral resources near Nabesna, Alaska, 2014 Imaging spectrometer reflectance data, mineral predominance map, and white mica wavelength position map, Nabesna Quadrangle, Alaska Imaging spectrometer reflectance data for Nabesna, Alaska Mineral predominance map for Nabesna, Alaska, derived from imaging spectrometer reflectance data White mica wavelength position map for Nabesna, Alaska, derived from imaging spectrometer reflectance data