Filters: Tags: Tyonek Quadrangle (X)
30 results (97ms)|
Filters
|
As part of the Department of Natural Resources (DNR) effort to make final recommendations of federal land parcels to be considered for selection by the State of Alaska according to provisions of the Statehood Act, a decision was made to identify and evaluate potential access corridors. Corridor maps were compiled for a total of 78 quadrangles throughout Alaska. This map suite shows relevant geologic information at a scale of 1:250,000 for 10-mile-wide corridors straddling centerlines for proposed access routes throughout Alaska. The maps are based on geologic data compiled from existing, published mapping. Each compiled corridor geology map was used to derive maps of potential construction materials, data quality,...
Cook Inlet has been recognized as the second-largest petroleum province in Alaska, second only to the North Slope. The south-central Tyonek Quadrangle is an area of significant geologic interest because it is the only location in Cook Inlet where the entire producing stratigraphy of the basin is exposed on the surface. Additionally, this area encompasses the structural boundary between the forearc basin and its sediment source rocks. To better understand the petroleum system and the geologic relationships between the exhumed arc intrusive rocks and adjacent Cenozoic stratigraphy of the Cook Inlet forearc basin, during the summer of 2010 the Alaska Division of Geological & Geophysical Surveys conducted a federally-funded...
A physiographically prominent, approximately 40 square km plateau lies roughly 20 km east of Mount Spurr volcano, northwestern Cook Inlet region, Alaska, and comprises the preserved remnant of a volcaniclastic succession, designated in this study as map unit Qvc. Although this readily mappable package of volcaniclastic rocks has been recognized in numerous studies during the past five decades, uncertainties regarding its age and origin have persisted. We describe the general characteristics of the volcaniclastic plateau, provide new age constraints for deposits, present lithofacies descriptions and interpretations of the volcaniclastic strata, and synthesize our observations and lithofacies analysis to propose an...
Alaska Division of Oil and Gas personnel collected and interpreted various data sources related to the interpretation of the Base Tertiary unconformity surface in the Cook Inlet Basin, Alaska.Data sources included public literature, public well data information (from the AOGCC-Alaska Oil and Gas Conservation Commission), a palynology database (Greater Cook Inlet Stratigraphic Palynology Control Database and Stud,Zippi, P.A., 2006) and over 2000 miles of 2D marine seismic data (CI-88 and CI-89 licensed from, and complements of, CGGVeritas.) Interpreted formation tops of the Base Tertiary unconformity are tabulated on the map.
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
This digital publication, GPR 2008-3, contains data produced from airborne geophysical surveys conducted in 2007 and 2008 for the Styx River Survey area, southcentral Alaska. Aeromagnetic and electromagnetic data were acquired for about 715 sq miles. Data provided in GPR 2008-3 include (1) raw and processed linedata in Geosoft ASCII XYZ files, (2) gridded files of magnetic data, a calculated vertical magnetic gradient (first vertical derivative), apparent resistivity data, and a digital elevation model, (3) flight lines in vector format, and maps of the data in PDF format. Data are described in more detail in the 'gpr2008_003_readme.pdf' and 'Styx-Linedata.txt' files included on the DVD.
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
The Alaska Volcano Observatory (AVO) uses an informal set of names for about 140 'volcanoes.' Some names refer to large, complex volcanic centers, while others indicate only a specific cone. This publication expands the list of 140 named volcanoes to include all volcanic vents where magma has reached the surface over the past 2.6 million years. This database of all known (published, or unpublished with permission) Quaternary volcanic vents was developed to better describe the nature and character of Quaternary volcanism in Alaska and specifically to aid in the discussion of spatial and temporal patterns of Alaska volcanism. This list is a preliminary starting point, and we hope that it is updated and expanded by...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (light detection and ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
The Tyonek area in the northwestern Cook Inlet trough is rich in petroleum, coal, geothermal, aggregate, and timber resources, but the detailed geologic mapping necessary for planning future resource development exists only in part of the area. This report and geologic map provide basic surficial-geologic information useful for exploiting those resources and planning future utility corridor developments. In addition to mapping of surficial geologic units, we provide discussion of strategraphic evidence pertaining to physiographic relations and geologic history of volcaniclastic deposits derived from ancestral Mount Spurr, multiple phases of Quaternary glacial activity, Chakachatna River valley landslide complexes...
This map shows the subcrop pattern of the Mesozoic rock units present at the top Mesozoic unconformity (also commonly referred to as the base Tertiary unconformity) in Cook Inlet basin, Alaska. The subcrop is projected onto the top Mesozoic unconformity depth surface of Cook Inlet basin, Alaska, published by Shellenbaum and others (2010). Publicly available geologic and geophysical data from multiple sources were collected, interpreted, and integrated into the subcrop map. Formation picks at the top Mesozoic unconformity were determined for 109 wells. Mesozoic horizons from two regional marine two-dimensional (2-D) seismic datasets (approximately 3,300 miles) were interpreted. Eight map units were established for...
This digital publication, GPR 2014-4, contains CGG's analysis and interpretation of data produced from airborne geophysical surveys published by DGGS in 2013 (GPR 2013-1) and 2014 (GPR 2014-5) for the Middle Styx and Farewell survey areas respectively. The two survey blocks Farewell and Middle Styx are referred to as the 'Farewell' survey in the project report as these blocks were flown under one contract. Elsewhere the separate block names, Farewell and Middle Styx, are typically used. CGG's frequency-domain DIGHEM V system was used for the EM data. GPR 2014-4 includes (1) CGG's project report with interpretation and detailed EM Anomalies, and (2) Multi-channel stacked profiles in pdf format. Interpretation maps...
The State of Alaska Division of Geological & Geophysical Surveys (DGGS) and Division of Oil & Gas (DOG) are currently engaged in a multi-year study of the hydrocarbon potential of the Tertiary and Mesozoic strata in Cook Inlet basin. Modal analyses and routine core analyses were performed on Tertiary and Mesozoic siltstones and sandstones collected during the 2007-2010 field seasons from six geographic areas in upper and lower Cook Inlet. The reservoir quality of Cook Inlet sandstones varies widely depending on their mineralogy, geologic age, burial depth, and depositional environment. Tuxedni and Naknek sandstones have poor reservoir quality and are likely to be of equally poor quality down dip. West Foreland sandstones...
The State of Alaska Division of Geological & Geophysical Surveys (DGGS) is currently engaged in a multi-year study of the hydrocarbon potential of the Tertiary and Mesozoic strata in Cook Inlet basin. This report summarizes mercury injection capillary pressure (MICP) data for 38 outcrop samples collected from the Tyonek, Beluga, and West Foreland Formations in the Tyonek and Talkeetna quadrangles. All samples were collected from measured stratigraphic sections. The Tyonek Formation samples have unimodal pore systems and the majority have well defined to sharp intrusion profiles. The Beluga Formation samples are characterized by unimodal pore systems and relatively broad intrusion profiles. The West Foreland Formation...
In advance of design, permitting, and construction of a pipeline to deliver North Slope natural gas to out-of-state customers and Alaska communities, the Division of Geological & Geophysical Surveys (DGGS) has acquired lidar (Light Detection and Ranging) data along proposed pipeline routes, nearby areas of infrastructure, and regions where significant geologic hazards have been identified. Lidar data will serve multiple purposes, but have primarily been collected to (1) evaluate active faulting, slope instability, thaw settlement, erosion, and other engineering constraints along proposed pipeline routes, and (2) provide a base layer for the state-federal GIS database that will be used to evaluate permit applications...
|
|
