Filters: Tags: Seismology (X) > Categories: Data (X)
128 results (25ms)|
Filters
Date Range
Extensions Types
Contacts
Categories Tag Types
|
The data set consists of text files used to create the synthetic seismogram - City of Miramar, G-2946, (IW-2), Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
This dataset contains LiDAR DEMs, magnetic field images and data, radiocarbon results, tree ring counts, and fault scarp trench logs.
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: Chelan, Washington,
Entiat, Washington,
Geomorphology,
Paleoseismology,
Seismology,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - City of Hollywood Utility, G-2961, (HOL-IW1), Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
Compressional- (P-) wave seismic refraction data were acquired in December 2018 and July 2019 along fourteen profiles within the spillway of Success Dam in Porterville, California. A new concrete ogee weir is planned for construction within the existing spillway, and the P-wave seismic velocity models will be used to inform further geotechnical investigations, including siting new geologic borings, and the advanced engineering design phases in terms of rock rippability and relative rock hardness/competency. Data acquisition, processing, and modeling were conducted collaboratively between the U.S. Geological Survey (USGS) and U.S. Army Corps of Engineers (USACE) Sacramento District. Data were acquired with Geometrics...
Categories: Data;
Tags: California,
GGGSC,
Geology, Geophysics, and Geochemistry Science Center,
Lake Success,
Porterville,
New active-source shallow seismic (shear-wave and acoustic-wave) measurements were obtained at 18 prioritized seismic monitoring station locations in the north San Francisco Bay area to measure site-specific ground motion amplification effects, soil depth, depth to bedrock (Z1.0 Vs=1 km/s), calculate site specific velocity-depth profiles and Vs30, and develop NEHRP site classifications for each location. This study was led by Principal Investigators Jamey Turner, Cooper Brossy, and Daniel O’Connell and field data were acquired by Glendon Adams and Lincoln Steele. Seismic monitoring sites that recorded high PGA values during the M6.0 Napa earthquake, proximal to higher population densities, and sites recommended...
Categories: Data;
Types: Citation,
Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: California,
EHP,
Earthquake Hazards Program,
GHSC,
Geologic Hazards Science Center,
This data release provides access to a low-altitude, aeromagnetic survey of a part of south-central Washington and north-central Oregon. The survey extends from the Blue Mountains westward to the Cascade Range and covers the Oregon cities of The Dalles, Hermiston, and Milton Freewater and the Washington cities of Richland, Pasco, Kennewick, and Walla Walla. Data were acquired during the summer of 2010 by Goldak Airborne Surveys working under contract to the U.S. Geological Survey. Total magnetic field values were acquired using a fixed-wing aircraft flown at a target elevation of 150 m above terrain (305 m over urban areas) and along flight lines and tie lines spaced 400 m and 4000 m apart, respectively. Flight...
In March 2015, the U.S. Geological Survey acquired seismic reflection and refraction data along an approximately 2.8-km-long profile across northwest-trending San Andreas Fault splays located at the Dos Palmas Preserve east of Salton Sea. To acquire the reflection and refraction data, we collocated shots and geophones, spaced every 3 m along the profile. We used 933 SercelTM L40A P-wave (40-Hz vertical-component) geophones with a sensitivity of 22.34 volts/meter/second to record 925 P-wave shots. We generated P-wave data using one of two active sources: 400-grain Betsy-SeisgunTM shots at approximately every 90 m and a 3.5-kg sledgehammer and steel plate combination at every 3 m between the seisgun shots. All data...
In October 2016, we acquired an approximately 15-km-long seismic profile along a linear transect across the East Bay region of the San Francisco Bay area. Our goal was to image previously unknown strands of the Hayward Fault zone and to better delineate the structure and geometry of the main trace of the Hayward Fault. Our profile started near the southern border of San Leandro, California at the San Francisco Bay shoreline, trended ENE through the northern edge of Castro Valley, California, and ended approximately 5 km WSW of San Ramon, California. The data were analyzed using refraction tomography modeling, reflection processing, and guided-wave analysis. The analyzed data are presented in separate reports by...
Categories: Data;
Tags: Geophysics,
Hayward,
San Francisco Bay Area,
Seismology,
USGS Science Data Catalog (SDC),
These data are a series of telecommunications voice and data restoration percentages for 17 counties affected by the HayWired earthquake scenario, a magnitude 7.0 earthquake occurring on the Hayward Fault on April 18, 2018, with an epicenter in the city of Oakland, CA. These data for telecommunications demand served are derived from residual network capacity based on potential hazard information (for example, ground shaking and liquefaction), assumptions about dependence on electric power restoration, and assumptions about network congestion caused by demand surge. Various resilience cases pertain to assumptions about the presence of backup power (for example, batteries or generators), ability to truck in fuel and...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: California,
HayWired,
San Francisco Bay area,
Seismology,
USGS Science Data Catalog (SDC),
This dataset accompanies planned publication 'Determining fault geometry through the transport-parallel distribution of thermochronometer cooling ages'. The Ar/Ar data is for samples that record the thermal history of the area. The geochronology provides time constraints for the thermal histories studied in the manuscript. Samples were collected from Nepal, overseen by Nadine McQuarrie (University of Pittsburgh), who sent them to the USGS Denver Argon Geochronology Laboratory for Ar/Ar analysis.
Categories: Data;
Tags: 40Ar/39Ar,
Argon Geochronology Laboratory,
GGGSC,
Geochemistry,
Geology, Geophysics, and Geochemistry Science Center,
Near-surface site characteristics are critical for accurately modeling ground motion, which in turn influences seismic hazard analysis and design of critical infrastructure. Currently, there are many strong motion accelerometers within the Advanced National Seismic System (ANSS) that are missing this information. We use a Geographic Information Systems (GIS) based framework to intersect the site coordinates of approximately 5,500 ANSS accelerometers located throughout the United States and its territories with geology and velocity information. We consider: (1) surficial geology from digitized geologic maps (Horton, 2017; Wilson et al., 2015; Sherrod et al., 2007; Bawiec, 1999; Saucedo, 2005; Bedrossian et al., 2012;...
Categories: Data;
Types: Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service;
Tags: ANSS,
Alabama,
American Samoa,
Arizona,
Arkansas,
This data release provides access to a low-altitude aeromagnetic survey flown over a part of the Cascade Range of the US Pacific Northwest, approximately centered over the town of Cascade Locks, Oregon. The Cascade Locks magnetic survey encompasses two large stratovolcanoes of the Cascade Range: Mt. Hood (3426 m) in Oregon and Mt. Adams (3742 m) in Washington. Data were acquired between October 17, 2021, and February 26, 2022, by KBM Resources Group, Thunder Bay, Ontario, Canada, working under contract to the U.S. Geological Survey. The survey is underlain by a diverse magnetic terrane, including Miocene flood basalts of the Columbia River Basalt Group and Tertiary to Quaternary volcanic and intrusive rocks of the...
Categories: Data;
Tags: Cascade Range,
Cascadia,
Clackamas County,
Clark County,
Columbia River Gorge National Scenic Area,
This digital elevation model provides a tool for calibrating tsunami risk to observations of the 1945 Makran tsunami in Karachi Harbour. The DEM bathymetry is derived from soundings made mainly during the first eight years after the tsunami. Although deficient in portraying intertidal backwaters and upland topography, the DEM accurately depicts the sheltered setting of one of the two tide gauges that recorded the 1945 tsunami.
Categories: Data;
Types: Downloadable,
GeoTIFF,
Map Service,
Raster;
Tags: Geography,
Geomorphology,
Geophysics,
Marine Geology,
Seismology,
This data release contains three spreadsheets that have aluminum-26 and beryllium-10 concentrations for samples collected in and near Sparta, North Carolina in 2021-2022. These samples were prepared for burial dating by the Reston Cosmogenic Nuclide (RECON) Lab and measured via accelerator mass spectrometry at the Purdue Rare Isotope Measurement (PRIME) Lab. The file “Sparta_SiteLocations_Odom.csv” contains site locations and interpreted ages; measurements of aluminum-26 and beryllium-10 and related data are located in respective .csv files.
High-resolution acoustic backscatter data, bathymetry data, single channel minisparker seismic-reflection data were collected by the U.S. Geological Survey (USGS) and the Alaska Department of Fish and Game in May of 2014 southwest of Chenega Island and southwest of Montague Island, Alaska. Data were collected aboard the Alaska Department of Fish and Game vessel, R/V Solstice, during USGS field activity 2014-622-FA, using a pole mounted 100-kHz Reson 7111 multibeam echosounder, a 500 Joule SIG 2-mille minisparker sound source and a single channel streamer.
A model of the lower seismogenic depth distribution of earthquakes in the western United States was developed to support models for seismic hazard assessment that will be included in the 2023 USGS National Seismic Hazard Model. This data release presents a recalibration using the hypocentral depths of events M>1 from the Advanced National Seismic System Comprehensive Earthquake Catalog from 1980 to 2021. For higher precision and better resolution in the model, the data were supplemented with seismicity from southern California that was relocated by Hauksson and others (2012). Along the San Andreas Fault, the deepest seismogenic depths are located at 23 km around the Cholame segment, whereas the shallowest depths...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
Shapefile;
Tags: Geophysics,
Seismology,
USGS Science Data Catalog (SDC),
United States,
earthquake occurrences,
VS30, the time-averaged shear-wave velocity (VS) to a depth of 30 meters, is a key index adopted by the earthquake engineering community to account for seismic site conditions. VS30 is typically based on geophysical measurements of VS derived from invasive and noninvasive techniques at sites of interest. Owing to cost considerations, as well as logistical and environmental concerns, VS30 data are sparse or not readily available for most areas. Where data are available, VS30 values are often assembled in assorted formats that are accessible from disparate and (or) impermanent Websites. To help remedy this situation, we compiled VS30 measurements obtained by studies funded by the U.S. Geological Survey (USGS) and...
Categories: Data;
Tags: Geophysics,
Seismology,
USGS Science Data Catalog (SDC),
United States,
earthquake seismology,
This release is an update to the online "Quaternary fault and fold database" for Washington State. The online database was last updated for Washington in 2014 – this 2020 update includes newly identified and modified traces and geometries for on-shore faults gleaned from new peer-reviewed studies and mapping of active faults within the state of Washington. These data contain lines representing the location of faults with known or suspected Quaternary (<1,600,000 yrs) activity in the state of Washington. This data was compiled in conjunction with the Washington State Geological Survey. Faults are attributed following the Quaternary fault and fold database attributes, including information such as age, slip sense,...
Categories: Data;
Types: Downloadable,
Map Service,
OGC WFS Layer,
OGC WMS Layer,
OGC WMS Service,
Shapefile;
Tags: Faulting,
Geomorphology,
Quaternary,
Seismic,
Seismology,
In April 2017, the U.S. Geological Survey acquired high resolution P- and S-wave seismic data across the suspected trace of the West Napa Fault zone in St. Helena, California. We acquired seismic reflection, refraction, and guided-wave data along a 215-m-long profile across the expected trend of the West Napa Fault zone. To acquire the reflection and refraction data, we co-located shots and geophones, spaced every 2 m along the profile. We used 109 SercelTM L40A P-wave (40-Hz vertical-component) geophones with a sensitivity of 22.34 volts/meter/second to record 108 P-wave shots, and 109 SercelTM L28-LBH S-wave (4.5-Hz horizontal-component) geophones with a sensitivity of 31.3 volts/meter/second to record 108 S-wave...
Categories: Data;
Tags: Geophysics,
Saint Helena,
Seismology,
USGS Science Data Catalog (SDC),
earthquakes,
The data set consists of time, depth, reflection coefficient synthetic, sonic velocity, density, and amplitude used to create synthetic seismogram - City of Sunrise Utility, G-2981, Broward County, Florida.
Categories: Data;
Types: Citation;
Tags: Broward County,
Miami-Dade County,
USA,
United States,
data preservation,
|
|
